SET: Dynagel 2000 Concentrate +

DYNAGEL 2000+ – coolant CONCENTRATE Long-lasting, long-lasting coolant concentrate. FOR ALL CAR TYPES AND MAKES , PASSENGER AND HIGHWAY. Guarantees complete engine cooling system protection for 5 years or 1,000,000 km *. MEETS G12++ STANDARD REQUIREMENTS . Can be used in all types of cooling systems: aluminum, cast iron, or mixed. 100% miscible with other coolants . Based on Organic Acid Technology. Completely protects the engine cooling system against corrosion and cavitation (rapid phase change from liquid to gas phase under the influence of pressure reduction). Protects non-metallic system components (seals, joints, fasteners) from aging. Free from toxic nitrites, amines, and phosphates – environmentally friendly. IN SUMMER The fluid's boiling point of 110°C will ensure the efficient operation of the cooling system and protection against boiling of the fluid in hot weather and when operating the car even in extreme conditions. WINTER The freezing point of -37°C guarantees effective protection of the cooling system during high frosts in our climatic conditions. * 5-year or 1,000,000 km warranty applies only to filling the cooling system and replenishing any losses with DYNAGEL 2000 fluid. DO NOT USE WITHOUT DILUTION. STANDARDS AND REQUIREMENTS Exceeds or meets the standards of the following manufacturers: VW, AUDI, SEAT, SKODA (TL 774 G), MERCEDES BENZ 325.6, FORD (ESE M97B49-A, WSS-M97B44-D &ESD M97 B49-A) , OPEL GM (QL130100) , RENAULT (41-01-001-D) , VOLVO, CHRYSLER (MS) 9176), GM (1899 M, US 6277 M) , MAN (324 Typ Si-OAT 248 & B&W D 36 5600) , JOHN DEERE (H 24 B1 & C1), LEYLAND TRUCKS (LTS 22 AF 10) , MACK (014GS 17004) , CUMMINS (85T8-2 & 90T8-4), MAN , SCANIA TB145, MTU MTL5048. Meets or exceeds the following standards: ASTM D3306, ASTM D 4985, SAE J 1034, BS 6580 (2010), AFNOR NF R15- 601, CUNA NC 956-16, UNE 26361 – 88, JIS K 2234, NATO S 759. HOW TO USE: Before replacing the fluid, check the recommendations and notes on cooling system maintenance in your vehicle's owner's manual.

1. With the engine cold, drain and flush the cooling system with clean water.
2. Check that all cable terminals and connections are tight.
3. Dilute according to the dilution table.
4. Fill the system to the proper level, according to the vehicle manufacturer's recommendations. Close the reservoir cap.
5. Start the engine for a few minutes and turn on the heater.
6. Turn off the engine, check the fluid level and top up if necessary.
7. Replenish any fluid lost during operation with DYNAGEL 2000+. In an emergency, minor losses can be topped up with distilled water in the summer.

Remember to check the fluid level and condition of the cooling system at least once a month and before every long trip. * The given price is gross and applies to 10 pieces of the product. ** The price of the product in 60l, 200l and 1000l packages includes the cost of delivery to any location in Poland